• Size 13 Fits Australian Standard 1/2" Drip line Amiad Hydro PCND 1640 Blue Stripe 0.620 * 0.710
• Size 14.7 Fits Netafim Dripmaster17 & Drip Line 2000, PPI : 6mm, Torro Drip in 16mm
• Size 15.2 Fits Amiad Hydro 1745 & 1740
• Size 16 Fits Australian Standard 16mm, Torro 18mm Blue Stripe 0.690 * 0.790
• Size 17.6 Fits Amiad Hydrodrip II 2035, Amiad Hydro P.O.W.D 2040, Terro Drip in 20mm
• Size 19 Fits Australian Standard 19mm and Netafim Dripmaster 20, PPI 20mm Blue Stripe 0.720 * 0.820
• Size 21 Fits NetaFim Dripmaster 2025, Blue Stripe 0.830 * 0.940
• Size 22 Fits Amiad Hydrodrip II 2513 & 2535
• Size 25 Fits 25mm ID Drip Line

  Tuff Tap / valves are used where strong, long lasting taps are required, to isolate sections of Drip Lines.

Tuff Tap / Hooked Valve
As a Tuff Tap / Valve it's used as a FLUSHING valve at the end of a Drip Line.

Tuff Tap / Hooked Elbow
As a Tuff Tap / Elbow it's use is as an INCOMING elbow on the water feed end.
Having the same incoming port size as the water feed pipe and the same outgoing port
as your drip line, allows the line to be easily attached both ends of the row reducing
line creep and makes redundant all those reducers and fittings currently being used.
This Elbow can be fitted with a valve allowing it to be used as an ISOLATION valve on the
incoming water end